Wobble Broaches

Offset Internal Rotating Broach Tool Holder

IMG 6671

  • This tool is used to produce hexagon, square and other irregular internal shapes in the workpiece as it is rotating in the spindle of the machine.
  • Minimal turret driving force is required due to the spindle offset which distributes the load of the cut.
  • The tool holder spindle, which is mounted in ball bearings, rotates freely with the workpiece and does not require auxiliary driving attachments.
  • Fine adjusting screws are provided for accurate aligning of the broach with the pre-drilled hole in the workpiece.
  • Can be used on B&S, Davenport, and multi-spindle screw machines, as well as turret lathes and CNC machines.
  • Also available with CAT, VDI, CAPTO C6, HSK & Morse Taper Shanks.

Collet Chuck Style Rotating Internal Broach Holders

IMG 6672

  • More versatile, just change the collet to accept any shank diameter broaching tool within the collet range. For example, you may want to purchase three common size collets, 0.315 (8mm), 0.472 (12mm), and 0.500 for the ER20 broach tool holder. This will allow you to use one holder for all shank sizes.
  • Built in stop screw allows you to adjust for different length broaches or to compensate for lengths on re-sharpened broaches.
  • Eliminates necessity of centering cutting tool to "spindle" of broaching holder. No screws to knock cutting tool off center.
  • Use only exact size High Precision DIN6499 ER collets.

Internal Hex Broaches for Swiss Holders

IMG 6673 2

  • M2 HSS Hardened
  • Ground all over
  • Angular clamping flat prevents pull out
  • Available in T15PM H.S.S.
  • Built in wobble cutting features 1° angle
  • Fits most Swiss type & gang machines

Internal Hex Broaches with .315 and .500 Diameter Shanks

IMG 6673

  • M2 HSS Hardened
  • Ground all over
  • Angular clamping flat prevents pull out
  • Fit all Rotating Broach Tools
  • Available in T15PM H.S.S. (Prices on application)
  • Hexagon go / no-go gages (with handle) are available upon request

Internal Broaches for 6 Lobed Head Screws

  • M2 HSS Hardened
  • Ground all over
  • Angular clamping flat prevents pull out
  • Fit all Rotating Broach Tools

Offset External Rotating Broach Tool Holder

  • This tool is used to produce hexagon, square and other irregular external shapes in the work piece as it is rotating in the spindle of the machine.
  • Minimal turret driving force is required due to the spindle offset which distributes the load of the cut.
  • The tool holder spindle, which is mounted in ball bearings, rotates freely with the workpiece and does not require auxiliary driving attachments.
  • Can be used on B&S, Davenport, and multi-spindle screw machines, as well as turret lathes and CNC machines.
  • The ORBX00/0.750 & all ORBX2 external holders can also be used for internal broaching.
  • Also available with CAT, VDI, CAPTO C6, HSK & Morse Taper Shanks.

PCD SUPPLIERS 2018

Go to top